How To Polish Gold
The most valuable accessories of women change the color of gold jewelry from time to time and darkens. At home, you can restore your dark and shining gold with a simple and practical process.
How to polish gold
Put warm water in a container. Drop a few drops of detergent into the container. You can also add mineral water for better glare. Put your gold jewelry in this water and wait for 15 minutes.Brush the gold with the help of a toothbrush, but make sure your toothbrush is soft. Hard brushes can cause gold to be scratched. After scrubbing, rinse with hot water. Then dry with a non-scratching cloth.
Ammonia is a method that is not often used. Therefore, do not do this very often. Being very effective may damage the bottom. Stir in a cup of water with ammonia. Then place the strainer inside. The filter will make it easier to remove the gold after the process. Leave your jewelry in this mixture for 5 minutes. Remove after 5 minutes. Wash and rinse under running water after removing. Dry with a soft cloth.
You can use both toothpaste and polish for the earrings you use. Apply a small amount of toothpaste to the toothbrush. Then brush with gentle movements. Rinse with water and dry with a cloth. Your gold will shine after this process.
Gold jewelry, which is worn continuously, sometimes creates dirt and oil. You can clean the oil and dirt on your jewelry with a simple method. Put water in a pot and boil. Then put the gold in water and boil for 5 minutes. Remove and dry after boiling.
How to polish jewelery?
Some golds have stones on them. The contact of these stones with water causes damage to the stones. Therefore, more caution should be exercised. You can get help from dishwashing detergent to polish your stony gold. Pour a small amount of dishwashing detergent into a clean cloth. Then wipe your stone jewelry with this cloth. Make sure that the cloth is not wet.Then wipe with another cloth with light touches. Finally, soak on a cloth to avoid staining. This will help your jewelery jewelry shine.